Vehicle Registration Process – Get to Know the Facts

In order for you to own and operate a vehicle in the state of Texas, you must get your vehicle registered first. This blog will highlight all the essential points which must be known about the vehicle registration process.


No matter in which county of Texas you live in, you are required to register all vehicles owned by you, upon which a registration sticker is issued, which must be pasted upon your vehicle, either on the windshield, or near the rear license plate. This serves as evidence that your vehicle has been registered and authorized by the state of Texas, to be used by you.

The procedure for getting your vehicle registered in your respective county, in Texas, is as follows.

  • The first thing to do is get your newly purchased vehicle registered, which must be done within 30 days after the vehicle has been bought.
  • If you are a non-resident, then a temporary registration permit would be issued to you. This permit will be valid for 30 days, from the date on which it is issued, and is usually permitted for transporting farm goods and equipment, during the peak seasons.
  • For certain special vehicles, as defined under Texas driving law, the owner may be granted a temporary permit after paying a reduced fee for registration. Such temporary tags are applicable for a period of 60 days.
  • Vehicles which have been registered to be used on farms, are also allowed to be used for the transportation of passengers from one place to another, however, this cannot be practiced for reasons related to employment.
  • There are certain vehicles which are not required to be registered or inspected in the state of Texas. These include:
  • Farm tractor, farm trailers or semi trailers, along with certain other types of farm trailers which are used for the transportation of fertilizers. However, the weight of such vehicles must not exceed 4000 lbs.
  • Power sweepers, golf carts (of a certain type), electric bicycles, and other electric mobility devices, need not be registered or inspected.

In order for these vehicles to not go through the process of registration, the owner must first get a license plate which distinguishes the vehicle from those that are required to be registered before use. These can be operated on the highway, however, only temporarily. Such vehicles also include vehicles used in the construction process, along with those which are used for drilling water from the ground.

For people who have just shifted to the state of Texas, and are new to it, it is mandatory for them to first register every vehicle they own, before they can apply for a driver’s license. They may be living here temporarily or may have shifted on a permanent basis, in both cases they are required to register their motor vehicle, before they are allowed to drive in Texas.

In order to gain further information regarding the matter, contact the County Tax Assessor – Collector, or the Department of Motor Vehicles in the state of Texas.

Vehicle Inspection – Mandatory for Safe Driving in Texas

Getting your motor vehicle inspected every year is a responsibility, which must be performed diligently and religiously. For all people who are living in the state of Texas, it is essential to get their motor vehicles registered and then inspected each year, in order to determine its working capacity. Motor vehicles which are not inspected may have certain hidden problems, which might result in unforeseen accidents with dire consequences.
Along with this, all motor vehicle owners are required to submit proof of their financial responsibility. An individual’s motor vehicle’s inspection would only be allowed, if he or she proves that the motor vehicle is, indeed, owned by them. Only then will the owner of the vehicle receive the sticker of inspection, which proves that the vehicle has been inspected and is functioning well.


This sticker, which is obtained after your vehicle has passed the motor vehicle inspection, must be pasted onto the windshield of your car. For people, who have vehicles without windshields, like a motorcycle or a moped, the sticker must be placed near the license plate at the rear end of the vehicle.

Each inspection sticker is valid for a period of one year, after the date of its passing the inspection. If a vehicle was involved in an accident and sent for repair inspection becomes mandatory once the repairs have been completed.

A motor vehicle inspection ensures that your vehicle is functioning properly, so that you may avoid most of the consequences, which occur as a result of an improperly functioning vehicle. Motor vehicles, which are powered through gasoline, are required to pass a safety emission test as well.

In Texas every motor vehicle is required to have certain equipment which must be in excellent working condition, so that your safety is not compromised. In order for your vehicle to be deemed safe and in excellent working condition, you must get the following equipment checked:

  • Brakes
  • Lights
  • Horns
  • Muffler and Exhaust System
  • Safety Glass
  • License Plates
  • Windshield Wiper
  • Rearview Mirror
  • Slow Moving Vehicle Emblem
  • Front Safety Belts
  • Tires
  • Fuel Cap

The requirements for each are different and are thoroughly inspected by the official motor vehicle inspection station. The brake must stop the car, when it is 25 feet apart from any other object, if it is running at a speed of 20 mph. It should also be able to hold the car in position, when the car is parked.

There must be two headlights, taillights, brake lights, one license plate light, two parking lights (one each, on the front and rear end), two reflectors, and turn signals, functioning at optimal level, in your vehicle. The rest of the aforementioned equipment must also be inspected thoroughly and passed by the inspection office, before your vehicle is granted the inspection sticker.

Be a responsible citizen and get your vehicle inspected every year, so that your life, along with the life of your loved ones remains safe.

How is Highway Driving Different from City Driving?

The importance of safe driving remains the same whether you are out driving on a highway or within the city. The rules of driving however vary greatly between the two types. The difference lies in the driving conditions on both roads.


Duration of the Drive
One of the biggest differences can be found in the duration of the drive. Highway driving is considerably more risky, due to the long routes and even longer hours. After a straight few hours of driving, there are more chances of the driver falling asleep behind the wheel, on a highway compared to the city road due to exhaustion.

Falling asleep even for a few seconds, could prove to be highly dangerous on a highway due to the high speed of the car. Driving in city, on the other hand is less risky because the drives are shorter and there is a lot of hustle bustle on the road, which leaves no chance for the driver to fall asleep.

Road Difference
There is a lot happening on the road due to which drivers are usually alert while driving. There are frequent signals, cops, other cars and twists and turns on the road as well. On the other hand the highway is devoid of twists and turns; it’s just a long stretch of road with very little effort required from the driver for keeping the car moving on track.

Traffic laws
Higher speeds are permitted on a highway, whereas, in the city there are various different speed limits that do not allow one to drive at a high speed for a long duration of time. Hence, car accidents in the city are not as dangerous as car accidents on the highway.
On a highway, an impact between two vehicles moving at high speeds could prove to be fatal for both; there is a very little chance of surviving in such collisions. This is the reason, drivers are told to stay alert on the highway.

Driving at Night
Driving on the highway at night is very dangerous for a driver who is not used to it. Constant vigilance is required at night time due to low visibility on highways, mainly because of the lack of street lights on the road. Usually the only visible patch of road is the one right in front of the car under the glare of a car’s front lights. Thus it is crucial that drivers make sure that their taillights and head lights are in working condition before setting out on a highway. Drivers should always remember to keep the high beam in the car switched off until absolutely necessary as it could impair the vision of a driver in the oncoming traffic’s lane.

As dangerous as driving on a highway is, city driving could be equally risky if a driver is distracted. Therefore it is of utmost importance to stay alert while behind the wheel of a car. A huge part of safe driving also involves obeying traffic laws, so stay alert, follow the traffic safety rules, and maintain calm at all times while driving for a safe and incident free drive.

How Are Electric Vehicles Better?

Global warming is one of the biggest threats to the survival of the human race currently. Even though, we realize the harm our actions are causing to the environment, we have become a slave to them. This is why engineers are busy creating safer versions of most of our creations responsible for polluting the environment.


A car is one of the inventions that are directly responsible for harming the earth. There are numerous emissions from a car that cause direct harm to the environment while consuming non-renewable resources at the same time. Hence, the electric car was introduced in the market as the safer and non-polluting replacement of a gasoline car. Let’s look at some of the benefits of an electric car compared to a gasoline car.
Pollution Free

The main reason behind creating an eco-friendly car was to give people a chance to use a vehicle that is environment friendly. The idea behind this invention was to reduce the overall emissions from gasoline cars into the environment, thus preventing them from causing any further damage.

Renewable Energy
An electric car is our key to driving a car that uses electricity as a source. If this electricity is created using renewable sources of energy, our cars will technically be clean as well; they will not harm the environment or leech our limited resources at all.
An Efficient Solution

Even while using electricity from fossil fuels, an electric car uses less energy than one that runs on gasoline and prevents us not only from polluting the environment, but reduces the overall energy consumption energy by 4 % as well.

Battery Replacement
The lead batteries used in conventional cars are hazardous while running and even when they are fully charged. Disposing these batteries is equally harmful to the environment though.

When this lead gets into the sea, it harms not only the marine life but also poisons the water for us as well. When this lead becomes a part of the soil, it adds lead to the vegetables grown in the soil. In comparison, the nickel and lithium batteries used in electric cars are safer for the environment than their lead counterparts.

Reduced Poisonous Fluids
Not only do gasoline cars emit harmful fumes and use non-renewable sources of energy, they also use chemicals that pollute the environment. These pollutants are typically in the form of anti freeze and motor oils etc. An electric car on the other hand requires no such fluids and chemicals to keep it running smoothly.

Fuel Dependency
Electric cars have been introduced as an option that can rid us of our dependency on fuel. Trading oil is one of the main causes behind the hostility amongst countries. If we could shift to electric cars, we will lose this fuel dependency that we have on oil exporting countries.

If we can clean up our electricity generation, electric cars would become the most eco-friendly vehicles, thus eliminating the threats that cars pose to our environment, completely.

How to Use GPS without Any Distraction during Driving?

A GPS is a device made for our ease while driving, but this same device could prove to be a danger for us, if not used safely. The dangers of using GPS while driving, holds the same risks as that of texting and eating behind the wheel.


According to the studies, the risks associated with GPS increase significantly when a driver has to enter an address into the system while on the road.

Many people have admitted to losing focus on the road while they are involved in studying the map of their route on the screen. The trouble with these devices lie in the fact that they make us lose our focus and cause us to take our eyes off the road and this is when accidents happen. Any task that directs our attention away from the road, poses a similar threat.

But surely, a lot of research was put into engineering a GPS and which is why it was created using the easiest input options that pose the least risk to the driver. This is why, after seeing the safety risks in manual devices, most new GPS systems come with a voice input method that doesn’t require one to take their eyes off the road at all. This is great news for people who have yet to buy GPS systems, but not for those who already own manual input devices.

Fortunately, there are some great safety tips that a manual device user could exercise in order to use a GPS safely. Read on for these tips.

Safety Tips

  • The first tip is the most important one of all. Do not input anything in to the navigation system while you are on the move.
  • Always ask the person in the passenger seat to read out the routes for you.
    Mount the device below eye level on the windshield, so that you don’t have to look very far or strain your neck to glance at the device.
  • Familiarize yourself with the route before setting out on the journey, so that you just have to look at the screen, a few times only.
  • Make maximum use of the navigation system, while waiting in traffic.
  • Keep the audio volume to a level that will not block out traffic noises and at the same time will be easy to hear over noises as well.
  • Make sure to check and adjust all settings before you set out on the road.
  • Choose a view option that is easiest for you to comprehend while driving. Adjust this before you start driving.
  • It is best to get used to the voice guidance from your GPS instead of glancing repeatedly at the screen, but make sure you use driving sense instead of blindly following orders given out by the GPS system. For example do not take a right turn, if your GPS tells you when you can see a wall blocking your way to your right.

A GPS System is made for your convenience and hence, it is a great device when driving in a new city but make sure it doesn’t turn into a problem instead of a solution for you.